Gate Valve

Product Details:

API Standard 600

API Standard 600, from the American Petroleum Institute, describes the criteria for valve design/construction and the material/trim designations for steel gate valves. The most recent version of this standard was published in January 2015, effective as of July 15, 2015.

Scope

API 600 covers bolted bonnet steel gate valves for the petroleum and natural gas industries, specifically where corrosion, erosion, and other service conditions indicate a need for full port openings, heavy wall sections, and extra large stem diameters.

Design specifications

API 600 specifies design criteria related to the following:

• Body wall thickness
• Bonnet wall thickness
• Body dimensions 
  • Flanged ends
  • Butt-welding ends
  • Body seats
  • Openings
• Bonnet dimensions
• Bonnet-to-body joints
• Gate
• Yoke
• Stem and stem nut
• Packing and packing box
• Bolting
• Auxiliary connections

The standard also covers designations related to materials and trim.

Finally, API 600 specifies the procedures for testing, inspection, and examination of bolted bonnet steel gate valves.

• Shell test
• Closure tightness test
• Backseat test

Product Details:

API Standard 600

API Standard 600, from the American Petroleum Institute, describes the criteria for valve design/construction and the material/trim designations for steel gate valves. The most recent version of this standard was published in January 2015, effective as of July 15, 2015.

Scope

API 600 covers bolted bonnet steel gate valves for the petroleum and natural gas industries, specifically where “corrosion, erosion, and other service conditions indicate a need for full port openings, heavy wall sections, and extra large stem diameters.”

Design specifications

API 600 specifies design criteria related to the following:

• Body wall thickness
• Bonnet wall thickness
• Body dimensions 
  • Flanged ends
  • Butt-welding ends
  • Body seats
  • Openings
• Bonnet dimensions
• Bonnet-to-body joints
• Gate
• Yoke
• Stem and stem nut
• Packing and packing box
• Bolting
• Auxiliary connections

The standard also covers designations related to materials and trim.

Finally, API 600 specifies the procedures for testing, inspection, and examination of bolted bonnet steel gate valves.

• Shell test
• Closure tightness test
• Backseat test

Additional Information:

• Delivery Time: Ready Stock

Product Details:

1/2″-2″
150lb-2500lb
Basic Design: API 602, ANSI B16.34
Test & Inspection: API 598

Design Features

• Outside Screw and Yoke(OS&Y)
• Two Piece self aligning packing gland
• Bolted bonnet with spiral-wound gasket
• Integral backseat

Specifications

• Basic Design: API 602, ANSI B16.34
• End to End: DHV Standard
• Test & Inspection: API-598
• Screwed Ends (NPT) to ANSI/ASME B1.20.1
• Socket weld Ends to ASME B16.11
• Butt weld Ends to ASME B16.25
• End Flange: ANSI B16.5

Optional Features

• Cast Steel, Alloy Steel, Stainless Steel
• Full Port or Regular Port
• Extended Stem or Below Seal
• Welded Bonnet or Pressure Seal Bonnet
• Locking Device upon request
• Manufacturing to NACE MR0175 upon request

 

Product Details:

SQK Carbon Steel Gate Valve is an ideal solution for all industries, across all valve types.  Suitable for both commodity, and critical applications, Carbon steel is a cost-effective solution for most piping systems.

Size : 2 Inch up to 36 Inch  (DN 50 to DN 900)

Pressure Rating : ASME 150# to 2500#

Materials: Carbon Steels, Low Temperature Carbon Steel, Martensitic Steels, Austenitic Stainless Steel, Duplex Stainless Steels, Super Duplex Stainless Steels, Alloy Steels, etc

Design Standard: API 600,BS 1414, API 602

Pressure / Temperature Rating: ASME B 16.34

Testing  Standard: API 598

Construction Details: Bolted Bonnet / Pressure Seal Bonnet / Welded Bonnet

End Connection: Flanged,Butt-Weld, Screwed, Socket-Weld

Operation: Hand Wheel, Gear Box

Please Note -

Prices are for the smallest size and lowest pressure of valve. Prices may vary in change in specifications (such as Size, Pressure rating, MOC , etc) on  case to case basis.

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: Bubble Wrapping & Export Grade Packaging in Wooden Box / Pallet.

Product Details:

Carbon steel is an ideal solution for all industries, across all valve types.  Suitable for both commodity, and critical applications, Carbon steel is a cost-effective solution for most piping systems.

Size : 2 Inch up to 36 Inch  (DN 50 to DN 900)

Pressure Rating : ASME 150# to 2500#

Materials: Carbon Steels, Low Temperature Carbon Steel, Martensitic Steels, Austenitic Stainless Steel, Duplex Stainless Steels, Super Duplex Stainless Steels, Alloy Steels, etc

Design Standard: API 600,BS 1414, API 602

Pressure / Temperature Rating: ASME B 16.34

Testing  Standard: API 598

Construction Details: Bolted Bonnet / Pressure Seal Bonnet / Welded Bonnet

End Connection: Flanged,Butt-Weld, Screwed, Socket-Weld

Operation: Hand Wheel, Gear Box

Please Note -
Prices are for the smallest size and lowest pressure of valve. Prices may vary in change in specifications (such as Size, Pressure rating, MOC , etc) on  case to case basis.

Additional Information:

• Production Capacity: 5000
• Delivery Time: Ready Stock
• Packaging Details: Bubble Wrapping & Export Grade Packaging in Wooden Box / Pallet.

Product Details:

API Standard 600

API Standard 600, from the American Petroleum Institute, describes the criteria for valve design/construction and the material/trim designations for steel gate valves. The most recent version of this standard was published in January 2015, effective as of July 15, 2015.

Scope

API 600 covers bolted bonnet steel gate valves for the petroleum and natural gas industries, specifically where “corrosion, erosion, and other service conditions indicate a need for full port openings, heavy wall sections, and extra large stem diameters.”

Design specifications

API 600 specifies design criteria related to the following:

• Body wall thickness
• Bonnet wall thickness
• Body dimensions 
  • Flanged ends
  • Butt-welding ends
  • Body seats
  • Openings
• Bonnet dimensions
• Bonnet-to-body joints
• Gate
• Yoke
• Stem and stem nut
• Packing and packing box
• Bolting
• Auxiliary connections

The standard also covers designations related to materials and trim.

Finally, API 600 specifies the procedures for testing, inspection, and examination of bolted bonnet steel gate valves.

• Shell test
• Closure tightness test
• Backseat test

Additional Information:

• Delivery Time: Ready Stock

Product Details:

Bolted Bonnet Gate Valve is an ideal solution for all industries, across all valve types.  Suitable for both commodity, and critical applications, Carbon steel is a cost-effective solution for most piping systems.

Size : 2 Inch up to 36 Inch  (DN 50 to DN 900)

Pressure Rating : ASME 150# to 2500#

Materials: Carbon Steels, Low Temperature Carbon Steel, Martensitic Steels, Austenitic Stainless Steel, Duplex Stainless Steels, Super Duplex Stainless Steels, Alloy Steels, etc

Design Standard: API 600,BS 1414, API 602

Pressure / Temperature Rating: ASME B 16.34

Testing  Standard: API 598

Construction Details: Bolted Bonnet / Pressure Seal Bonnet / Welded Bonnet

End Connection: Flanged,Butt-Weld, Screwed, Socket-Weld

Operation: Hand Wheel, Gear Box

Please Note -

Prices are for the smallest size and lowest pressure of valve. Prices may vary in change in specifications (such as Size, Pressure rating, MOC , etc) on  case to case basis.

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: Bubble Wrapping & Export Grade Packaging in Wooden Box / Pallet.

Product Details:

SQK Flange End Gate Valve is an ideal solution for all industries, across all valve types.  Suitable for both commodity, and critical applications, Carbon steel is a cost-effective solution for most piping systems.

Size : 2 Inch up to 36 Inch  (DN 50 to DN 900)

Pressure Rating : ASME 150# to 2500#

Materials: Carbon Steels, Low Temperature Carbon Steel, Martensitic Steels, Austenitic Stainless Steel, Duplex Stainless Steels, Super Duplex Stainless Steels, Alloy Steels, etc

Design Standard: API 600,BS 1414, API 602

Pressure / Temperature Rating: ASME B 16.34

Testing  Standard: API 598

Construction Details: Bolted Bonnet / Pressure Seal Bonnet / Welded Bonnet

End Connection: Flanged,Butt-Weld, Screwed, Socket-Weld

Operation: Hand Wheel, Gear Box

Please Note -

Prices are for the smallest size and lowest pressure of valve. Prices may vary in change in specifications (such as Size, Pressure rating, MOC , etc) on  case to case basis.

Additional Information:

• Packaging Details: Bubble Wrapping & Export Grade Packaging in Wooden Box / Pallet.

Product Details:

A216 WCB Cast Carbon Steel Gate Valve is an ideal solution for all industries, across all valve types.  Suitable for both commodity, and critical applications, Carbon steel is a cost-effective solution for most piping systems.

A216 WCB is carbon steel castings for valves, flanges, fittings, or other pressure-containing parts for high-temperature service and of quality suitable for assembly with other castings or wrought-steel parts by fusion welding.

A216 WCB Temperature Range: -29°C - 425°C

A216 WCB Equivalent material: ASTM A105

A216 WCB Suitable Fluid: Oil, Gas, Water, Petrochemical, non Corrosion Fluid

Size : 2 Inch up to 36 Inch  (DN 50 to DN 900)

Pressure Rating : ASME 150# to 2500#

Materials: Carbon Steels, Low Temperature Carbon Steel, Martensitic Steels, Austenitic Stainless Steel, Duplex Stainless Steels, Super Duplex Stainless Steels, Alloy Steels, etc

Design Standard: API 600,BS 1414, API 602

Pressure / Temperature Rating: ASME B 16.34

Testing  Standard: API 598

Construction Details: Bolted Bonnet / Pressure Seal Bonnet / Welded Bonnet

End Connection: Flanged, Butt-Weld, Screwed, Socket-Weld

Operation: Hand Wheel, Gear Box

Please Note -

Prices are for the smallest size and lowest pressure of valve. Prices may vary in change in specifications (such as Size, Pressure rating, MOC , etc) on  case to case basis.

Additional Information:

• Delivery Time: Ready Stock

Product Details:

ASTM A216 WCC has a slightly higher pressure/ temperature rating than A216 WCB as it has a higher yield strength and a slightly higher manganese content.
Gate Valve is an ideal solution for all industries, across all valve types.  Suitable for both commodity, and critical applications, Carbon steel is a cost-effective solution for most piping systems.

Size : 2 Inch up to 36 Inch  (DN 50 to DN 900)

Pressure Rating : ASME 150# to 2500#

Materials: Carbon Steels, Low Temperature Carbon Steel, Martensitic Steels, Austenitic Stainless Steel, Duplex Stainless Steels, Super Duplex Stainless Steels, Alloy Steels, etc

Design Standard: API 600,BS 1414, API 602

Pressure / Temperature Rating: ASME B 16.34

Testing  Standard: API 598

Construction Details: Bolted Bonnet / Pressure Seal Bonnet / Welded Bonnet

End Connection: Flanged,Butt-Weld, Screwed, Socket-Weld

Operation: Hand Wheel, Gear Box

Please Note -

Prices are for the smallest size and lowest pressure of valve. Prices may vary in change in specifications (such as Size, Pressure rating, MOC , etc) on  case to case basis.

Product Details:

Carbon steel is an ideal solution for all industries, across all valve types.  Suitable for both commodity, and critical applications, Carbon steel is a cost-effective solution for most piping systems.

Size : 2 Inch up to 36 Inch  (DN 50 to DN 900)

Pressure Rating : ASME 150# to 2500#

Materials: Carbon Steels, Low Temperature Carbon Steel, Martensitic Steels, Austenitic Stainless Steel, Duplex Stainless Steels, Super Duplex Stainless Steels, Alloy Steels, etc

Design Standard: API 600,BS 1414, API 602

Pressure / Temperature Rating: ASME B 16.34

Testing  Standard: API 598

Construction Details: Bolted Bonnet / Pressure Seal Bonnet / Welded Bonnet

End Connection: Flanged,Butt-Weld, Screwed, Socket-Weld

Operation: Hand Wheel, Gear Box

Please Note -

Prices are for the smallest size and lowest pressure of valve. Prices may vary in change in specifications (such as Size, Pressure rating, MOC , etc) on  case to case basis.

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: Bubble Wrapping & Export Grade Packaging in Wooden Box / Pallet.

Product Details:

SQK Gate Valve is an ideal solution for all industries, across all valve types.  Suitable for both commodity, and critical applications, Carbon steel is a cost-effective solution for most piping systems.
SQK Valves manufacture Gate Valves in
Class 150# / 300# / 400# / 600# / 900# / 1500# / 2500# / PN 10 / PN 16 / PN 20 / PN 50 / PN 64 / PN 100 / PN 150 / PN 250 / PN 420

Size : 2 Inch up to 36 Inch  (DN 50 to DN 900)
Pressure Rating : ASME 150# to 2500#
Materials: Carbon Steels, Low Temperature Carbon Steel, Martensitic Steels, Austenitic Stainless Steel, Duplex Stainless Steels, Super Duplex Stainless Steels, Alloy Steels, etc
Design Standard: API 600,BS 1414, API 602
Pressure / Temperature Rating: ASME B 16.34
Testing  Standard: API 598
Construction Details: Bolted Bonnet / Pressure Seal Bonnet / Welded Bonnet
End Connection: Flanged,Butt-Weld, Screwed, Socket-Weld
Operation: Hand Wheel, Gear Box

Please Note -

Prices are for the smallest size and lowest pressure of valve. Prices may vary in change in specifications (such as Size, Pressure rating, MOC , etc) on  case to case basis.

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: Bubble Wrapping & Export Grade Packaging in Wooden Box / Pallet.

Product Details:

With an objective to fulfill the ever evolving demands of our clients, we are engaged in offering a wide assortment of Stainless Steel Gate Valve

Product Details:

With an objective to fulfill the ever evolving demands of our clients, we are engaged in offering a wide assortment of Cast Gate Valve

Product Details:

With an objective to fulfill the ever evolving demands of our clients, we are engaged in offering a wide assortment of Forged Gate Valve

Product Details:

With an objective to fulfill the ever evolving demands of our clients, we are engaged in offering a wide assortment of Forged Carbon Steel Gate Valve

Product Details:

With an objective to fulfill the ever evolving demands of our clients, we are engaged in offering a wide assortment of Wedge Gate Valve

Product Details:

With an objective to fulfill the ever evolving demands of our clients, we are engaged in offering a wide assortment of Pressure Seal Gate Valve

Product Details:

With an objective to fulfill the ever evolving demands of our clients, we are engaged in offering a wide assortment of Industrial Gate Valve

Product Details:

With an objective to fulfill the ever evolving demands of our clients, we are engaged in offering a wide assortment of Jacketed Gate Valve

Product Details:

With an objective to fulfill the ever evolving demands of our clients, we are engaged in offering a wide assortment of Flanged Gate Valve

Product Details:

With an objective to fulfill the ever evolving demands of our clients, we are engaged in offering a wide assortment of Gate Valves

Product Details:

API Standard 600

API Standard 600, from the American Petroleum Institute, describes the criteria for valve design/construction and the material/trim designations for steel gate valves. The most recent version of this standard was published in January 2015, effective as of July 15, 2015.

Scope

API 600 covers bolted bonnet steel gate valves for the petroleum and natural gas industries, specifically where corrosion, erosion, and other service conditions indicate a need for full port openings, heavy wall sections, and extra large stem diameters.

Design specifications

API 600 specifies design criteria related to the following:

• Body wall thickness
• Bonnet wall thickness
• Body dimensions 
  • Flanged ends
  • Butt-welding ends
  • Body seats
  • Openings
• Bonnet dimensions
• Bonnet-to-body joints
• Gate
• Yoke
• Stem and stem nut
• Packing and packing box
• Bolting
• Auxiliary connections

The standard also covers designations related to materials and trim.

Finally, API 600 specifies the procedures for testing, inspection, and examination of bolted bonnet steel gate valves.

• Shell test
• Closure tightness test
• Backseat test

Product Details:

API 600 Gate Valve is an ideal solution for all industries, across all valve types.  Suitable for both commodity, and critical applications, Carbon steel is a cost-effective solution for most piping systems.

Size : 2 Inch up to 36 Inch  (DN 50 to DN 900)

Pressure Rating : ASME 150# to 2500#

Materials: Carbon Steels, Low Temperature Carbon Steel, Martensitic Steels, Austenitic Stainless Steel, Duplex Stainless Steels, Super Duplex Stainless Steels, Alloy Steels, etc

Design Standard: API 600,BS 1414, API 602

Pressure / Temperature Rating: ASME B 16.34

Testing  Standard: API 598

Construction Details: Bolted Bonnet / Pressure Seal Bonnet / Welded Bonnet

End Connection: Flanged,Butt-Weld, Screwed, Socket-Weld

Operation: Hand Wheel, Gear Box

Please Note -

 

Prices are for the smallest size and lowest pressure of valve. Prices may vary in change in specifications (such as Size, Pressure rating, MOC , etc) on  case to case basis.

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: Bubble Wrapping & Export Grade Packaging in Wooden Box / Pallet.

Product Details:

With an objective to fulfill the ever evolving demands of our clients, we are engaged in offering a wide assortment of Motorized Gate Valve

The API 600 Gate Valves is exceptionally sturdy, rugged, and durable, with a reputation for quality, integrity, and long service. They are designed for tight sealing and ease of operation. The valves are available flanged & butt-weld ends in pressure rating from ASME Class 150 to Class 2500, and in a variety of materials of construction. Gate Valves are of flexible wedge design, outside screw and yoke, and bolted-bonnet construction. The valves conform to API 600. Main features • Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet • Bellows-sealed Gate and Globe valves available • Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks • Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor • T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 • Rolled ACME thread on stem for smooth operation • Tapered shoulder on the stem for back seating • Self-aligning type gland assembly with stud-and-nut tightening • Integral hard-faced body seat for globe and check valves • Spring-loaded disc on check valves suitable for no horizontal applications too • Gate and globe valves can be offered with electrical actuators • Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion • Valves can be offered to NACE MR-0175 and other special NACE requirements

Additional Information:

• Minimum Order Quantity: 1 Piece

The API 600 Gate Valves is exceptionally sturdy, rugged, and durable, with a reputation for quality, integrity, and long service. They are designed for tight sealing and ease of operation. The valves are available flanged & butt-weld ends in pressure rating from ASME Class 150 to Class 2500, and in a variety of materials of construction. Gate Valves are of flexible wedge design, outside screw and yoke, and bolted-bonnet construction. The valves conform to API 600. Main features • Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet • Bellows-sealed Gate and Globe valves available • Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks • Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor • T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 • Rolled ACME thread on stem for smooth operation • Tapered shoulder on the stem for back seating • Self-aligning type gland assembly with stud-and-nut tightening • Integral hard-faced body seat for globe and check valves • Spring-loaded disc on check valves suitable for no horizontal applications too • Gate and globe valves can be offered with electrical actuators • Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion • Valves can be offered to NACE MR-0175 and other special NACE requirements

Additional Information:

• Minimum Order Quantity: 1 Piece

Cast Steel Gate Valve Bolted Bonnet The API 600 Gate Valves is exceptionally sturdy, rugged, and durable, with a reputation for quality, integrity, and long service. They are designed for tight sealing and ease of operation. The valves are available flanged & butt-weld ends in pressure rating from ASME Class 150 to Class 2500, and in a variety of materials of construction. Gate Valves are of flexible wedge design, outside screw and yoke, and bolted-bonnet construction. The valves conform to API 600. Main features • Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet • Bellows-sealed Gate and Globe valves available • Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks • Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor • T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 • Rolled ACME thread on stem for smooth operation • Tapered shoulder on the stem for back seating • Self-aligning type gland assembly with stud-and-nut tightening • Integral hard-faced body seat for globe and check valves • Spring-loaded disc on check valves suitable for no horizontal applications too • Gate and globe valves can be offered with electrical actuators • Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion • Valves can be offered to NACE MR-0175 and other special NACE requirements

Additional Information:

• Minimum Order Quantity: 1 Piece

Cast Steel Gate Valve Bolted Bonnet The API 600 Gate Valves is exceptionally sturdy, rugged, and durable, with a reputation for quality, integrity, and long service. They are designed for tight sealing and ease of operation. The valves are available flanged & butt-weld ends in pressure rating from ASME Class 150 to Class 2500, and in a variety of materials of construction. Gate Valves are of flexible wedge design, outside screw and yoke, and bolted-bonnet construction. The valves conform to API 600. Main features • Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet • Bellows-sealed Gate and Globe valves available • Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks • Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor • T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 • Rolled ACME thread on stem for smooth operation • Tapered shoulder on the stem for back seating • Self-aligning type gland assembly with stud-and-nut tightening • Integral hard-faced body seat for globe and check valves • Spring-loaded disc on check valves suitable for no horizontal applications too • Gate and globe valves can be offered with electrical actuators • Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion • Valves can be offered to NACE MR-0175 and other special NACE requirements

Additional Information:

• Minimum Order Quantity: 1 Piece

Cast Steel Gate Valve Bolted Bonnet The API 600 Gate Valves is exceptionally sturdy, rugged, and durable, with a reputation for quality, integrity, and long service. They are designed for tight sealing and ease of operation. The valves are available flanged & butt-weld ends in pressure rating from ASME Class 150 to Class 2500, and in a variety of materials of construction. Gate Valves are of flexible wedge design, outside screw and yoke, and bolted-bonnet construction. The valves conform to API 600. Main features • Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet • Bellows-sealed Gate and Globe valves available • Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks • Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor • T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 • Rolled ACME thread on stem for smooth operation • Tapered shoulder on the stem for back seating • Self-aligning type gland assembly with stud-and-nut tightening • Integral hard-faced body seat for globe and check valves • Spring-loaded disc on check valves suitable for no horizontal applications too • Gate and globe valves can be offered with electrical actuators • Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion • Valves can be offered to NACE MR-0175 and other special NACE requirements

Additional Information:

• Minimum Order Quantity: 1 Piece

Cast Steel Gate Valve Bolted Bonnet The API 600 Gate Valves is exceptionally sturdy, rugged, and durable, with a reputation for quality, integrity, and long service. They are designed for tight sealing and ease of operation. The valves are available flanged & butt-weld ends in pressure rating from ASME Class 150 to Class 2500, and in a variety of materials of construction. Gate Valves are of flexible wedge design, outside screw and yoke, and bolted-bonnet construction. The valves conform to API 600. Main features • Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet • Bellows-sealed Gate and Globe valves available • Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks • Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor • T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 • Rolled ACME thread on stem for smooth operation • Tapered shoulder on the stem for back seating • Self-aligning type gland assembly with stud-and-nut tightening • Integral hard-faced body seat for globe and check valves • Spring-loaded disc on check valves suitable for no horizontal applications too • Gate and globe valves can be offered with electrical actuators • Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion • Valves can be offered to NACE MR-0175 and other special NACE requirements

Additional Information:

• Minimum Order Quantity: 1 Piece

Cast Steel Gate Valve Bolted Bonnet The API 600 Gate Valves is exceptionally sturdy, rugged, and durable, with a reputation for quality, integrity, and long service. They are designed for tight sealing and ease of operation. The valves are available flanged & butt-weld ends in pressure rating from ASME Class 150 to Class 2500, and in a variety of materials of construction. Gate Valves are of flexible wedge design, outside screw and yoke, and bolted-bonnet construction. The valves conform to API 600. Main features • Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet • Bellows-sealed Gate and Globe valves available • Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks • Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor • T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 • Rolled ACME thread on stem for smooth operation • Tapered shoulder on the stem for back seating • Self-aligning type gland assembly with stud-and-nut tightening • Integral hard-faced body seat for globe and check valves • Spring-loaded disc on check valves suitable for no horizontal applications too • Gate and globe valves can be offered with electrical actuators • Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion • Valves can be offered to NACE MR-0175 and other special NACE requirements

Additional Information:

• Minimum Order Quantity: 1 Piece

The API 600 Gate Valves is exceptionally sturdy, rugged, and durable, with a reputation for quality, integrity, and long service. They are designed for tight sealing and ease of operation. The valves are available flanged & butt-weld ends in pressure rating from ASME Class 150 to Class 2500, and in a variety of materials of construction. Gate Valves are of flexible wedge design, outside screw and yoke, and bolted-bonnet construction. The valves conform to API 600. Main features • Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet • Bellows-sealed Gate and Globe valves available • Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks • Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor • T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 • Rolled ACME thread on stem for smooth operation • Tapered shoulder on the stem for back seating • Self-aligning type gland assembly with stud-and-nut tightening • Integral hard-faced body seat for globe and check valves • Spring-loaded disc on check valves suitable for no horizontal applications too • Gate and globe valves can be offered with electrical actuators • Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion • Valves can be offered to NACE MR-0175 and other special NACE requirements

Additional Information:

• Minimum Order Quantity: 1 Piece

The API 600 Gate Valves is exceptionally sturdy, rugged, and durable, with a reputation for quality, integrity, and long service. They are designed for tight sealing and ease of operation. The valves are available flanged & butt-weld ends in pressure rating from ASME Class 150 to Class 2500, and in a variety of materials of construction. Gate Valves are of flexible wedge design, outside screw and yoke, and bolted-bonnet construction. The valves conform to API 600. Main features • Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet • Bellows-sealed Gate and Globe valves available • Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks • Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor • T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 • Rolled ACME thread on stem for smooth operation • Tapered shoulder on the stem for back seating • Self-aligning type gland assembly with stud-and-nut tightening • Integral hard-faced body seat for globe and check valves • Spring-loaded disc on check valves suitable for no horizontal applications too • Gate and globe valves can be offered with electrical actuators • Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion • Valves can be offered to NACE MR-0175 and other special NACE requirements

Additional Information:

• Minimum Order Quantity: 1 Piece

The API 600 Gate Valves is exceptionally sturdy, rugged, and durable, with a reputation for quality, integrity, and long service. They are designed for tight sealing and ease of operation. The valves are available flanged & butt-weld ends in pressure rating from ASME Class 150 to Class 2500, and in a variety of materials of construction. Gate Valves are of flexible wedge design, outside screw and yoke, and bolted-bonnet construction. The valves conform to API 600. Main features • Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet • Bellows-sealed Gate and Globe valves available • Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks • Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor • T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 • Rolled ACME thread on stem for smooth operation • Tapered shoulder on the stem for back seating • Self-aligning type gland assembly with stud-and-nut tightening • Integral hard-faced body seat for globe and check valves • Spring-loaded disc on check valves suitable for no horizontal applications too • Gate and globe valves can be offered with electrical actuators • Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion • Valves can be offered to NACE MR-0175 and other special NACE requirements

Additional Information:

• Minimum Order Quantity: 1 Piece

The API 600 Gate Valves is exceptionally sturdy, rugged, and durable, with a reputation for quality, integrity, and long service. They are designed for tight sealing and ease of operation. The valves are available flanged & butt-weld ends in pressure rating from ASME Class 150 to Class 2500, and in a variety of materials of construction. Gate Valves are of flexible wedge design, outside screw and yoke, and bolted-bonnet construction. The valves conform to API 600. Main features • Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet • Bellows-sealed Gate and Globe valves available • Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks • Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor • T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 • Rolled ACME thread on stem for smooth operation • Tapered shoulder on the stem for back seating • Self-aligning type gland assembly with stud-and-nut tightening • Integral hard-faced body seat for globe and check valves • Spring-loaded disc on check valves suitable for no horizontal applications too • Gate and globe valves can be offered with electrical actuators • Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion • Valves can be offered to NACE MR-0175 and other special NACE requirements

Additional Information:

• Minimum Order Quantity: 1 Piece

The API 600 Gate Valves is exceptionally sturdy, rugged, and durable, with a reputation for quality, integrity, and long service. They are designed for tight sealing and ease of operation. The valves are available flanged & butt-weld ends in pressure rating from ASME Class 150 to Class 2500, and in a variety of materials of construction. Gate Valves are of flexible wedge design, outside screw and yoke, and bolted-bonnet construction. The valves conform to API 600. Main features • Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet • Bellows-sealed Gate and Globe valves available • Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks • Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor • T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 • Rolled ACME thread on stem for smooth operation • Tapered shoulder on the stem for back seating • Self-aligning type gland assembly with stud-and-nut tightening • Integral hard-faced body seat for globe and check valves • Spring-loaded disc on check valves suitable for no horizontal applications too • Gate and globe valves can be offered with electrical actuators • Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion • Valves can be offered to NACE MR-0175 and other special NACE requirements

Additional Information:

• Minimum Order Quantity: 1 Piece

The API 600 Gate Valves is exceptionally sturdy, rugged, and durable, with a reputation for quality, integrity, and long service. They are designed for tight sealing and ease of operation. The valves are available flanged & butt-weld ends in pressure rating from ASME Class 150 to Class 2500, and in a variety of materials of construction. Gate Valves are of flexible wedge design, outside screw and yoke, and bolted-bonnet construction. The valves conform to API 600. Main features • Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet • Bellows-sealed Gate and Globe valves available • Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks • Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor • T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 • Rolled ACME thread on stem for smooth operation • Tapered shoulder on the stem for back seating • Self-aligning type gland assembly with stud-and-nut tightening • Integral hard-faced body seat for globe and check valves • Spring-loaded disc on check valves suitable for no horizontal applications too • Gate and globe valves can be offered with electrical actuators • Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion • Valves can be offered to NACE MR-0175 and other special NACE requirements

Additional Information:

• Minimum Order Quantity: 1 Piece