Globe Valves

Product Details:

Forged Steel Globe Valves are generally available with Plug Type Disc, which is designed to give leak tight seating over a long period of in built wear life. All Globe Valve stem is made from solid one piece construction. The yoke bush of Globe Valve has a long thread engagement for accurate stem alignment.

Product Details:

Globe valves are used for flow regulation, frequent operation, increased flow resistance or for positive shutoff when closed. Globe valves are closing-down valves in which the closure member is moved squarely on and off the seat. By this mode of disc travel, the seat opening varies in direct proportion to the travel of the disc. This proportional relationship between valve opening and disc travel is ideally suited for duties involving regulation of flow rate. Globe valves can also be used for on-off duty, the seating load can be positively controlled with high sealing capacity. The change in direction of fluid flow through these valves produces increased resistance and pressure drop. The oblique pattern globevalve body is designed to reduce the flow resistance of the valve to a minimum. This valve combines low flow resistance for on-off duty with the robustness of globe-valve seatings. Globe valves are used in many industrial applications including the oil and gas industry, pharmaceutical, manufacturing, automotive, and marine. Globe valves are also recommended for services requiring frequent operation and positive shutoff.

Product Details:

Gear Operated Globe Valves are designed for flow control or on/off isolation of fluids. they are manufactured in straight patterns, angle patterns, oblique patterns and needle designs with a large variety of internal seat construction variants to handle high pressure flow control duties, a wide choice of metal body options and trims means globe valves are widely used throughout industry.

Gear Operated Globe Valves designs consist of O, S & Y type, rising spindle and bolted bonnets, the valve comprises of a solid rotating plug type disc which is fine lapped, back seat facilities provides easy replacement of gland packing under pressure. extra deep stuffing box ensures fluid tightness, long packing life and low emissions. we offer globe valves with special packings, suitable for thermic fluid temperature up to 550° C 

Product Details:

A globe valve is a linear motion valve used to stop, start, and regulate the fluid flow. The globe valve disk can be removed entirely from the flow path, or it can completely close the flow path. During the opening and closing of the valve, the disc moves perpendicularly to the seat.

This movement creates the annular space between the disk and seat ring that gradually closes as the valve closed. This characteristic provides the globe valve good throttling ability required for regulating the flow.

Leakage from the globe valve seat is less as compared to the gate valve, mainly due to right angle contact between the disc and seat ring, which allows tighter seal between seat the disk.

Product Details:

A globe valve, different from ball valve, is a type of valve used for regulating flow in a pipeline, consisting of a movable plug or disc element and a stationary ring seat in a generally spherical body.^[1]

Globe valves are named for their spherical body shape with the two halves of the body being separated by an internal baffle. This has an opening that forms a seat onto which a movable plug^[2] can be screwed in to close (or shut) the valve. The plug is also called a disc or disk.^[3] In globe valves, the plug is connected to a stem which is operated by screw action using a handwheel in manual valves.

Product Details:

With an objective to fulfill the ever evolving demands of our clients, we are engaged in offering a wide assortment of Flanged End Globe Valve

Product Details:

With an objective to fulfill the ever evolving demands of our clients, we are engaged in offering a wide assortment of Cryogenic Globe Valve

Product Details:

With an objective to fulfill the ever evolving demands of our clients, we are engaged in offering a wide assortment of Hand Wheel Operated Globe Valve

Product Details:

With an objective to fulfill the ever evolving demands of our clients, we are engaged in offering a wide assortment of Forged Steel Globe Valve

Globe Valves feature a ball-type disc, outside screw-and-yoke and bolted-bonnetconstruction. They conform to BS 1873 and also meet the general requirements of API 600,including shell wall thickness and stuffing box dimensions.Main features• Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet• Bellows-sealed Globe valves available• Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphitefiller for maximum protection against leaks• Die-formed graphite inner packing rings and braided graphite end rings with Inconel wirereinforcement and corrosion inhibitor• Rolled ACME thread on stem for smooth operation• Tapered shoulder on the stem for back seating• Self-aligning type gland assembly with stud-and-nut tightening• Integral hard-faced body seat for globe and check valves• Spring-loaded disc on check valves suitable for no horizontal applications too• Gate and globe valves can be offered with electrical actuators• Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impactstrength, minimal heat loss and resistance to corrosion• Valves can be offered to NACE MR-0175 and other special NACE requirements

Additional Information:

• Minimum Order Quantity: 1 Piece

Globe Valves feature a ball-type disc, outside screw-and-yoke and bolted-bonnetconstruction. They conform to BS 1873 and also meet the general requirements of API 600,including shell wall thickness and stuffing box dimensions.Main features• Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet• Bellows-sealed Globe valves available• Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphitefiller for maximum protection against leaks• Die-formed graphite inner packing rings and braided graphite end rings with Inconel wirereinforcement and corrosion inhibitor• Rolled ACME thread on stem for smooth operation• Tapered shoulder on the stem for back seating• Self-aligning type gland assembly with stud-and-nut tightening• Integral hard-faced body seat for globe and check valves• Spring-loaded disc on check valves suitable for no horizontal applications too• Gate and globe valves can be offered with electrical actuators• Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impactstrength, minimal heat loss and resistance to corrosion• Valves can be offered to NACE MR-0175 and other special NACE requirements

Additional Information:

• Minimum Order Quantity: 1 Piece

Globe Valves feature a ball-type disc, outside screw-and-yoke and bolted-bonnetconstruction. They conform to BS 1873 and also meet the general requirements of API 600,including shell wall thickness and stuffing box dimensions.Main features• Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet• Bellows-sealed Globe valves available• Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphitefiller for maximum protection against leaks• Die-formed graphite inner packing rings and braided graphite end rings with Inconel wirereinforcement and corrosion inhibitor• Rolled ACME thread on stem for smooth operation• Tapered shoulder on the stem for back seating• Self-aligning type gland assembly with stud-and-nut tightening• Integral hard-faced body seat for globe and check valves• Spring-loaded disc on check valves suitable for no horizontal applications too• Gate and globe valves can be offered with electrical actuators• Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impactstrength, minimal heat loss and resistance to corrosion• Valves can be offered to NACE MR-0175 and other special NACE requirements

Additional Information:

• Minimum Order Quantity: 1 Piece

Globe Valves feature a ball-type disc, outside screw-and-yoke and bolted-bonnetconstruction. They conform to BS 1873 and also meet the general requirements of API 600,including shell wall thickness and stuffing box dimensions.Main features• Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet• Bellows-sealed Globe valves available• Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphitefiller for maximum protection against leaks• Die-formed graphite inner packing rings and braided graphite end rings with Inconel wirereinforcement and corrosion inhibitor• Rolled ACME thread on stem for smooth operation• Tapered shoulder on the stem for back seating• Self-aligning type gland assembly with stud-and-nut tightening• Integral hard-faced body seat for globe and check valves• Spring-loaded disc on check valves suitable for no horizontal applications too• Gate and globe valves can be offered with electrical actuators• Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impactstrength, minimal heat loss and resistance to corrosion• Valves can be offered to NACE MR-0175 and other special NACE requirements

Additional Information:

• Minimum Order Quantity: 1 Piece

Globe Valves feature a ball-type disc, outside screw-and-yoke and bolted-bonnetconstruction. They conform to BS 1873 and also meet the general requirements of API 600,including shell wall thickness and stuffing box dimensions.Main features• Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet• Bellows-sealed Globe valves available• Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphitefiller for maximum protection against leaks• Die-formed graphite inner packing rings and braided graphite end rings with Inconel wirereinforcement and corrosion inhibitor• Rolled ACME thread on stem for smooth operation• Tapered shoulder on the stem for back seating• Self-aligning type gland assembly with stud-and-nut tightening• Integral hard-faced body seat for globe and check valves• Spring-loaded disc on check valves suitable for no horizontal applications too• Gate and globe valves can be offered with electrical actuators• Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impactstrength, minimal heat loss and resistance to corrosion• Valves can be offered to NACE MR-0175 and other special NACE requirements

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

A globe valve, different from ball valve, is a type of valve used for regulating flow in a pipeline, consisting of a movable plug or disc element and a stationary ring seat in a generally spherical body.^[1]

Globe valves are named for their spherical body shape with the two halves of the body being separated by an internal baffle. This has an opening that forms a seat onto which a movable plug^[2] can be screwed in to close (or shut) the valve. The plug is also called a disc or disk.^[3] In globe valves, the plug is connected to a stem which is operated by screw action using a handwheel in manual valves.

Product Details:

Pressure Seal Valves

Pressure seal construction is adopted for Valves for high pressure service, typically in excess of above 170 bar. The unique feature about the pressure seal Bonnet is that the body-Bonnet joints seals improves as the internal pressure in the Valve increases, compared to other constructions where the increase in internal pressure tends to create leaks in the body-Bonnet joint.

Relying on fairly simple design principles, pressure seal Valves have proven their capability to handle increasingly demanding fossil and combined-cycle steam isolation applications, as designers continue to push boiler, HRSG, and piping system pressure/temperature envelopes. Pressure seal Valves are typically available in size ranges from 2 inches to 24 inches and ASME B16.34 pressure classes from #600 to #2500, although some manufacturers can accommodate the need for larger diameters and higher ratings for special applications.

 

Pressure seal Valves are available in many material qualities such as A105 forged and Gr.WCB cast, alloy F22 forged and Gr.WC9 cast; F11 forged and Gr.WC6 cast, austenitic stainless F316 forged and Gr.CF8M cast; for over 500°C, F316H forged and suitable austenitic cast grades.

Additional Information:

• Delivery Time: Ready Stock

Product Details:

A globe valve is a linear motion valve used to stop, start, and regulate the fluid flow. The globe valve disk can be removed entirely from the flow path, or it can completely close the flow path. During the opening and closing of the valve, the disc moves perpendicularly to the seat.

A globe valve is a linear motion valve used to stop, start, and regulate the fluid flow. The globe valve disk can be removed entirely from the flow path, or it can completely close the flow path. During the opening and closing of the valve, the disc moves perpendicularly to the seat.

Product Details:

With an objective to fulfill the ever evolving demands of our clients, we are engaged in offering a wide assortment of Stainless Steel Globe Valve

Product Details:

With an objective to fulfill the ever evolving demands of our clients, we are engaged in offering a wide assortment of Forged Carbon Steel Globe Valve

Product Details:

With an objective to fulfill the ever evolving demands of our clients, we are engaged in offering a wide assortment of Carbon Steel Globe Valve

Product Details:

With an objective to fulfill the ever evolving demands of our clients, we are engaged in offering a wide assortment of Cast Carbon Steel Globe Valve

Product Details:

With an objective to fulfill the ever evolving demands of our clients, we are engaged in offering a wide assortment of Cast Steel Globe Valves

Globe Valves feature a ball-type disc, outside screw-and-yoke and bolted-bonnetconstruction. They conform to BS 1873 and also meet the general requirements of API 600,including shell wall thickness and stuffing box dimensions.Main features• Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet• Bellows-sealed Globe valves available• Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphitefiller for maximum protection against leaks• Die-formed graphite inner packing rings and braided graphite end rings with Inconel wirereinforcement and corrosion inhibitor• Rolled ACME thread on stem for smooth operation• Tapered shoulder on the stem for back seating• Self-aligning type gland assembly with stud-and-nut tightening• Integral hard-faced body seat for globe and check valves• Spring-loaded disc on check valves suitable for no horizontal applications too• Gate and globe valves can be offered with electrical actuators• Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impactstrength, minimal heat loss and resistance to corrosion• Valves can be offered to NACE MR-0175 and other special NACE requirements

Additional Information:

• Minimum Order Quantity: 1 Piece

Globe Valves feature a ball-type disc, outside screw-and-yoke and bolted-bonnetconstruction. They conform to BS 1873 and also meet the general requirements of API 600,including shell wall thickness and stuffing box dimensions.Main features• Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet• Bellows-sealed Globe valves available• Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphitefiller for maximum protection against leaks• Die-formed graphite inner packing rings and braided graphite end rings with Inconel wirereinforcement and corrosion inhibitor• Rolled ACME thread on stem for smooth operation• Tapered shoulder on the stem for back seating• Self-aligning type gland assembly with stud-and-nut tightening• Integral hard-faced body seat for globe and check valves• Spring-loaded disc on check valves suitable for no horizontal applications too• Gate and globe valves can be offered with electrical actuators• Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impactstrength, minimal heat loss and resistance to corrosion• Valves can be offered to NACE MR-0175 and other special NACE requirements

Additional Information:

• Minimum Order Quantity: 1 Piece

Globe Valves feature a ball-type disc, outside screw-and-yoke and bolted-bonnetconstruction. They conform to BS 1873 and also meet the general requirements of API 600,including shell wall thickness and stuffing box dimensions.Main features• Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet• Bellows-sealed Globe valves available• Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphitefiller for maximum protection against leaks• Die-formed graphite inner packing rings and braided graphite end rings with Inconel wirereinforcement and corrosion inhibitor• Rolled ACME thread on stem for smooth operation• Tapered shoulder on the stem for back seating• Self-aligning type gland assembly with stud-and-nut tightening• Integral hard-faced body seat for globe and check valves• Spring-loaded disc on check valves suitable for no horizontal applications too• Gate and globe valves can be offered with electrical actuators• Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impactstrength, minimal heat loss and resistance to corrosion• Valves can be offered to NACE MR-0175 and other special NACE requirements

Additional Information:

• Minimum Order Quantity: 1 Piece

Globe Valves feature a ball-type disc, outside screw-and-yoke and bolted-bonnetconstruction. They conform to BS 1873 and also meet the general requirements of API 600,including shell wall thickness and stuffing box dimensions.Main features• Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet• Bellows-sealed Globe valves available• Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphitefiller for maximum protection against leaks• Die-formed graphite inner packing rings and braided graphite end rings with Inconel wirereinforcement and corrosion inhibitor• Rolled ACME thread on stem for smooth operation• Tapered shoulder on the stem for back seating• Self-aligning type gland assembly with stud-and-nut tightening• Integral hard-faced body seat for globe and check valves• Spring-loaded disc on check valves suitable for no horizontal applications too• Gate and globe valves can be offered with electrical actuators• Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impactstrength, minimal heat loss and resistance to corrosion• Valves can be offered to NACE MR-0175 and other special NACE requirements

Additional Information:

• Minimum Order Quantity: 1 Piece

Globe Valves feature a ball-type disc, outside screw-and-yoke and bolted-bonnetconstruction. They conform to BS 1873 and also meet the general requirements of API 600,including shell wall thickness and stuffing box dimensions.Main features• Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet• Bellows-sealed Globe valves available• Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphitefiller for maximum protection against leaks• Die-formed graphite inner packing rings and braided graphite end rings with Inconel wirereinforcement and corrosion inhibitor• Rolled ACME thread on stem for smooth operation• Tapered shoulder on the stem for back seating• Self-aligning type gland assembly with stud-and-nut tightening• Integral hard-faced body seat for globe and check valves• Spring-loaded disc on check valves suitable for no horizontal applications too• Gate and globe valves can be offered with electrical actuators• Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impactstrength, minimal heat loss and resistance to corrosion• Valves can be offered to NACE MR-0175 and other special NACE requirements

Additional Information:

• Minimum Order Quantity: 1 Piece

Globe Valves feature a ball-type disc, outside screw-and-yoke and bolted-bonnetconstruction. They conform to BS 1873 and also meet the general requirements of API 600,including shell wall thickness and stuffing box dimensions.Main features• Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet• Bellows-sealed Globe valves available• Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphitefiller for maximum protection against leaks• Die-formed graphite inner packing rings and braided graphite end rings with Inconel wirereinforcement and corrosion inhibitor• Rolled ACME thread on stem for smooth operation• Tapered shoulder on the stem for back seating• Self-aligning type gland assembly with stud-and-nut tightening• Integral hard-faced body seat for globe and check valves• Spring-loaded disc on check valves suitable for no horizontal applications too• Gate and globe valves can be offered with electrical actuators• Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impactstrength, minimal heat loss and resistance to corrosion• Valves can be offered to NACE MR-0175 and other special NACE requirements

Additional Information:

• Minimum Order Quantity: 1 Piece

Globe Valves feature a ball-type disc, outside screw-and-yoke and bolted-bonnetconstruction. They conform to BS 1873 and also meet the general requirements of API 600,including shell wall thickness and stuffing box dimensions.Main features• Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet• Bellows-sealed Globe valves available• Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphitefiller for maximum protection against leaks• Die-formed graphite inner packing rings and braided graphite end rings with Inconel wirereinforcement and corrosion inhibitor• Rolled ACME thread on stem for smooth operation• Tapered shoulder on the stem for back seating• Self-aligning type gland assembly with stud-and-nut tightening• Integral hard-faced body seat for globe and check valves• Spring-loaded disc on check valves suitable for no horizontal applications too• Gate and globe valves can be offered with electrical actuators• Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impactstrength, minimal heat loss and resistance to corrosion• Valves can be offered to NACE MR-0175 and other special NACE requirements

Additional Information:

• Minimum Order Quantity: 1 Piece